How to quickly clean motorcycle carburetor
Some motorcycle enthusiasts often encounter such a situation when climbing, that is, the motorcycle accelerates weakly or even cannot start when climbing, which is a headache for them. Usually, such a situation is mostly due to the carburetor, which indicates that the carburetor should be cleaned. Here, we will teach you how to clean the carburetor by yourself.
Remove the carburetor from the motorcycle, clean the outside of the carburetor first, then disassemble and clean the main components. If the stains are difficult to remove, use a carburetor-specific cleaning agent to clean them. The key cleaning parts of the carburetor are the main oil passage orifice, oil level chamber, oil level control needle valve, etc., to thoroughly remove the sediment and accumulated impurities attached inside the carburetor. Such as: rust, dirt, colloidal particles, etc. After cleaning, reinstall and start the test run to observe and adjust the technical performance of the carburetor under various operating conditions.
After using two boxes of automotive ethanol gasoline, conduct a preventive inspection and cleaning of the carburetor. During the initial period of use, due to the cleaning cycle of automotive ethanol gasoline products in the turnover process, it is inevitable that some trace impurities will be washed down and enter the carburetor through the oil channel; Too many impurities will affect the normal operation of the carburetor. Therefore, after a period of use, it is necessary to check and clean the carburetor.
Finally, if the motorcycle driver finds that the idle speed is unstable or there is a self-extinguishing phenomenon during use, it is generally only necessary to check and clean the carburetor; If you feel that the power is not good during riding, just adjust the mixture of the carburetor to be thicker.